The Geratherm® classic glass thermometer works on the principle of liquid expansion as the temperature rises. Since 1992 we have used the harmless Galinstan® as the measuring liquid.
The Geratherm® classic glass thermometer works on the principle of liquid expansion as the temperature rises. The measuring liquid is located in the sensor. The liquid is sensitive to temperature, expands and rises in the measuring capillary. The maximum thermometer prevents the measuring liquid from falling again after the measurement. This means the measured value can still be read on the scale some time later.
Since 1992 we have used the harmless Galinstan® as the measuring liquid. Free from toxic mercury.
Mercury-free medical glass thermometer for rectal, oral and underarm measurement of body temperature.
Intended for: Within the stated measuring range and at the stated measuring sites, the thermometer can be used for all patients, regardless of their age, body weight and sex.
Indications:
Not suitable for determining basal temperature for cycle monitoring
Taking a measurement
1. Take the thermometer out of the storage case.
2. Clean and disinfect the product before use according to the cleaning and disinfection instructions in the section “Cleaning and disinfection”.
3. Check that the measuring liquid is below 36 °C (96.8 °F). If this is not the case, you must first reset the measuring liquid using the enclosed reset tool.
Before each new measurement you must reset the thermometer's measuring liquid. To do this, use the supplied insert of the magnifier case (Geratherm® classic plus).
4. Place the thermometer at the measuring site of your choice.
Rectal measurement – temperature measurement in the anus.
Apply some lubricant (e.g. petroleum jelly or body oil) to the measuring tip so that it can enter the anus more easily. Then carefully insert the thermometer tip approx. 2 to 3 cm into the anus (rectum).
Oral measurement – temperature measurement in the mouth. Place the tip in one of the two heat pockets under the tongue, to the left or right of the root of the tongue. Keep the mouth closed during oral temperature measurement and breathe evenly through the nose to achieve thermal equilibrium.
Axillary measurement – temperature measurement under the armpit. Dry the armpit with a towel and place the measuring tip in the armpit. Hold the arm firmly down.
Keep the armpit closed during axillary temperature measurement to establish thermal equilibrium.
5. After at least 4 minutes, the thermometer has taken on the body temperature.
6. The measuring liquid in the measuring capillary now shows the measured value, which can be read on the scale.
Turning the thermometer slightly can make it easier to read the measuring liquid against the blue background of the capillary. Make sure there is sufficient lighting when reading.
Note regarding the magnifier case product configuration: To read the thermometer's measured value even more easily, place the thermometer in the white insert and slide it into the magnifier case. The values appear larger due to the magnifying effect.
7. Clean the thermometer again according to the section “Cleaning and disinfection”.
8. Then reset the measuring liquid as described in step 3.
9. Insert the thermometer tip-down back into the storage case to store it. You can also store the thermometer in the magnifier case. When doing so, make sure the tip of the thermometer does not protrude at the front.
Cleaning and disinfection
The thermometer has a hermetically sealed glass housing and is waterproof.
Make sure all surfaces are accessible for cleaning and disinfection. Clean the thermometer before disinfecting it.
First remove coarse soiling and lubricant residue with a dry, clean disposable cloth. For cleaning, moisten a clean, soft cloth with soap solution (maximum 42 °C / 107.6 °F) and thoroughly clean the entire surface of the thermometer.
To disinfect the thermometer, moisten a clean, soft cloth with an alcohol-based disinfectant solution (e.g. 70% isopropanol). Wipe the thermometer in the direction of the tip and leave the disinfectant to act according to the manufacturer's instructions.
To remove residues of cleaning agent or disinfectant, moisten a new, clean, soft disposable cloth with clean water and wipe it over the thermometer a few times. If dirt is still visible after cleaning, repeat the steps above.
Disposal
The packaging and instructions for use are made of cardboard and paper and can be disposed of in accordance with local waste disposal regulations. If the thermometer breaks, the leaked liquid can be removed with a brush, a piece of cellulose or a cloth moistened with soap solution. The residues can Heat pockets under the tongue be disposed of with household waste in accordance with local waste disposal regulations. Caution: risk of cuts!
Storage advice
Medical device. Read the package leaflet before use.
Responsible for placing on the market
Medzorg Nederland BV