Dull spots, etch marks or acid stains on your marble worktop, windowsill or natural stone floor? These surface damages reduce the natural beauty of your interior. The original shine and appearance have often disappeared.

With HG natural stone top layer restorer, you can repair damage caused by etching, light wear and acids from soft drinks and wine. This product has been specially developed for marble and other calcareous natural stone types. The surface regains its natural beauty. You will see the stone shine again.

This solution prevents costly replacement or professional restoration. You enjoy the convenience of restoring valuable surfaces yourself.

Instructions for use for an optimal result:

• The surface must be completely clean, grease and dust-free. Clean beforehand with HG natural stone cleaner extra powerful (product 40) and allow to dry.
• Wear protective gloves. Apply the liquid thinly with a dry, clean cloth.
• Rub it in with a steel wool pad. Continue rubbing until the surface is dry and a clear shine appears.
• Work in small sections, maximum 40 cm², without interruptions.
• Repeat 1 to 2 times for the desired shine. Then wipe the surface thoroughly with a dry cloth.

A 250ml bottle is sufficient for approximately 15m². This makes it an effective choice for maintaining your natural stone.

Important warnings:
Transport and store the bottle upright. Not suitable for non-calcareous surfaces or coated surfaces. Remove spilled product immediately to prevent etch marks. Never leave used pads or sponges on the treated surface.
WARNING H302 - Harmful if swallowed. Contains: magnesium hexafluorosilicate EINECS: 241-022-2