A newly laid or renovated tiled floor immediately gives your home a fresh and well-maintained look. However, stubborn cement film or light rust stains can significantly disrupt this result and are difficult to remove with ordinary cleaning agents. HG Tile Cement Grout Remover offers a helping hand. This specially developed formula effectively dissolves cement film and rust without damaging the joints. This way, you can quickly enjoy a perfectly clean and hygienic floor again.
HG Tile Cement Grout Remover (product 11) uses a balanced acidic composition containing, among other things, phosphoric acid and oxalic acid. These acids react specifically with the lime and cement residues on the tile to make them liquid and soluble, while the special additives ensure that the joint structure is consolidated.
| Non-ionic surfactants | <5% |
| Perfumes | Present |
Contains, among other things: Non-ionic surfactants <5%, perfumes.
Follow the steps below for the correct use of HG tile cement film remover (product 11).
1. Dissolve HG tile cement film remover in water.
2. Pre-wet the surface to be treated with clean water.
3. Apply the solution generously using a floor cloth or mop. Treat no more than 10 to 15m² at a time.
4. Scrub the surface well with a scrubbing brush. Leave to work for 15 to 20 minutes and keep the floor wet with the solution of this product during the soaking time.
5. Then scrub the treated surface well once more.
6. Remove the solution with a floor cloth and then mop the floor with clean water.
Consumption: ±20-50 m2 depending on the dilution and the intensity of the cement film.
Transport and store the bottle upright.
DANGER H302- Harmful if swallowed.
H314- Causes severe skin burns and eye damage.
Contains: Phosphoric acid EINECS 231-633-2, Oxalic acid EINECS 205-634-3 and Isotridecanol, ethoxylated EINECS 931-137-2.
| Brand | HG |
| Content | 1 Litre |
| Weight | 1001.000 kg |
| Categories | Other, Household |