After a renovation or laying a new floor, you naturally want to enjoy the result immediately. However, a stubborn cement film or a layer of mortar residue often remains, completely masking the shine and appearance of your new tiles. Ordinary cleaning agents are often not powerful enough to dissolve these mineral residues, while aggressive acids can permanently damage the joints. HG Tile cement grout remover offers the perfect, safe solution for your floor. This specially developed formula effectively dissolves cement residue from the tile surface, while the joints are spared and even strengthened.
Key benefits
- Targeted action: Dissolves cement and mortar residue from the tile surface without affecting or weakening the joints.
- Joint-strengthening formula: The unique composition contributes to the reinforcement of existing joints during the cleaning process.
- Suitable for natural stone: Safe to use on non-calcareous natural stone types such as granite, quartzite and Norwegian slate.
- Concentrate for flexible dosage: Can be diluted as needed, depending on the stubbornness of the cement residue.
How it works
HG Tile cement grout remover (product 12) works on the basis of a controlled acid reaction that breaks down the bonds in cement and mortar residue, causing them to become liquid and easily washed away. What makes this product unique is its selective action: it reacts with the unwanted film on the tiles, but does not affect the structure of the grout between the tiles. This ensures a clean result while maintaining the structural integrity of your floor.
Composition
| Active substances | hydrogen chloride |
| EINECS number | 231-595-7 |
Ingredients
Contains: hydrogen chloride, EINECS: 231-595-7.
Use & Dosage
Follow the steps below for the correct use of HG tile cement grout remover (product 12).
1. Dissolve half a litre of HG tile cement grout remover in a bucket with 5 litres of water. For more intensive cement or mortar residue, a stronger solution can be made up to 1 litre in 4 litres of water.
2. Wet the surface to be treated beforehand with clean water.
3. Then apply the solution generously using a floor cloth or mop.
4. Scrub the surface well with a scrubbing brush or broom. Leave to work for a few minutes and then scrub well again.
5. After this, remove the solution from the surface with a floor cloth, which should be rinsed and wrung out regularly in water.
6. Finally, mop the floor 2-3 more times with clean water.
Do not use on calcareous natural stone types such as marble, travertine, bluestone, various slate types and concrete tiles/floors.
Safety & Disclaimer
H314- Causes severe skin burns and eye damage.
P101- If medical advice is needed, have product container or label at hand.
P102- Keep out of reach of children.
P280- Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331- IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501- Dispose of contents/container to a collection point for hazardous or special waste. Contains: hydrogen chloride, EINECS: 231 - 595-7
| Product specifications |
|---|
| Brand | HG |
| Weight | 1001.000 kg |
| Categories | Other, Household |
