Monitoring the health of your animals accurately can be a challenge, especially when fast and reliable results are essential for their well-being. Uncertainty about the body temperature of a pet or livestock causes unnecessary anxiety for the caregiver. The Microlife veterinary thermometer 1831 provides the necessary certainty by delivering an exact measurement within seconds, so you know exactly where you stand and can provide appropriate care.
- Fast results: The measurement time of just 10 seconds minimises discomfort for the animal and speeds up the check-up process.
- Optimal readability: The digital JUMBO LCD screen ensures that the temperature can be read clearly and without errors.
- Hygienic and durable: Thanks to the 100% waterproof design, the thermometer is fully submersible for thorough cleaning and disinfection.
- Ease of use: The automatic self-test and switch-off function guarantee correct operation and save the battery for long-term use.
How it works
The Microlife 1831 has been specifically developed for veterinary applications, where precision and speed are crucial. When switched on, the device automatically performs a system test to verify the accuracy of the sensor. Thanks to the memory function, you can easily recall the last measurement to monitor temperature trends, which contributes to an expert approach to animal health within your daily routine.
Composition
| Contents | 1 piece |
|---|
| Type | Digital veterinary thermometer |
|---|
| Display | JUMBO LCD |
|---|
| Features | 100% waterproof, Memory of last measurement |
|---|
Ingredients
Thermometer with protective case.
Use & Dosage
To switch the thermometer on, press the button: a short signal (beep) indicates «thermometer on». A display test is performed. All segments are displayed. At an ambient temperature of less than 32 °C, «-- -» and a flashing «°C» are displayed in the top right corner. The thermometer is now ready for use. During a measurement, the measured temperature is constantly displayed. The «°C» flashes during this period. When the signal sounds (10 times «beep») and the «°C» no longer flashes, it means that the measured increase in temperature is less than 0.1 °C per 8 seconds and the thermometer can now be read. To save the battery, press the off button lightly to switch the thermometer off. Otherwise, the thermometer will switch itself off after approximately 10 minutes. If the button is held down for more than 3 seconds when the thermometer is switched on, the automatically saved maximum temperature of the last measurement will be displayed. At the same time, an «M» for memory will appear on the display field. Approximately 3 seconds after releasing the button, the temperature value disappears and the thermometer is ready to take a measurement. Measurement method: In the anus (rectal). Carefully insert the measuring sensor of the thermometer 2 to 3 cm into the anal opening. Measurement time approx.: 10 seconds.
Safety & Disclaimer
This thermometer is only suitable for measuring animal body temperature. The minimum measurement time until the signal sounds (beep) must always be observed. Protect the thermometer from damage caused by dropping or impact. Avoid ambient temperatures above 60 °C. Never boil the thermometer! Only use the common cleaning agents mentioned in the section «Cleaning and disinfecting» to clean the thermometer. The thermometer must be intact when it is cleaned. The manufacturer recommends having the accuracy checked by an authorised laboratory every 2 years. Only suitable for use on animals. Medical device. Read the instructions for use before use.
